Weather Defense Platinum drywall is a moisture- and mold-resistant exterior wall sheathing designed to be covered by an exterior-finish cladding such as siding, brick, masonry veneer, or wire-lath stucco.
Weather Defense Platinum is specially formulated, noncombustible, moisture- and mold-resistant gypsum core is covered with a coated fiberglass mat on the board's front, back, and long edges. Weather Defense Platinum can be used in exterior insulation and finish systems (EIFS) when specified by the EIFS manufacturer, and as a substrate for air- and water-resistant barriers, including wraps, self-adhesive membranes, and liquid-applied coatings.
Weather Defense Platinum offers superior resistance to normal weather conditions and will, in most applications, provide protection from exposure to the elements for up to 12 months (subject to the terms, conditions, and exclusions of Continental's limited warranty). Use of a flexible sealant to fill all exposed cutouts and joints will afford additional protection when construction is delayed for an extended period.
Weather Defense Platinum is lightweight; scores, cuts, and fastens easily; and has specially coated facers to provide irritation-resistant handling. It is designed for use in applications that require direct mechanical attachment to wood or metal framing, or attachment to steel-stud curtain walls. Exterior cladding should be attached mechanically through the sheathing and directly to the framing.
Weather Defense Platinum offers enhanced protection against the growth of mold and mildew on its surface and in its core compared with paper-faced sheathing. Under controlled testing conditions, Weather Defense Platinum achieved an average panel score of 10 out of a possible 10, the highest level of performance for mold resistance using ASTM D 3273. As with any building material, avoiding exposure to water during handling, storage, and installation is the best way to avoid the formation of mold and mildew.
Note: This is not a structural product and is not intended as a replacement for plywood or structurally engineered sheathing requiring racking qualities. Weather Defense Platinum should not be used where temperatures exceed 125 degrees F for extended periods or in areas of extreme humidity.
Weather Defense Platinum is designed for exterior wall and soffit applications where resistance to normal weather conditions is desired. Applicable areas include:
- Exterior wall sheathing;
- Exterior soffits;
- Exterior ceilings, underhangs, and carports; and
- As a base for exterior cladding and EIFS.
Mold resistance: Weather Defense Platinum offers enhanced protection against the growth of mold and mildew on its surface and in its core.
Weather resistance: Weather Defense Platinum will, in most applications, provide protection from exposure to the elements for up to 12 months (subject to the terms, conditions, and exclusions of Continental's limited warranty).
Warranted performance: Weather Defense Platinum offers warranted performance for a period of five years when used as a substrate in architecturally specified EIFS. Please refer to Continental's limited warranty (link below) for more details.
Core: Noncombustible, dimensionally stable, inert gypsum specially formulated to resist mold and moisture.
Facers: Coated fiberglass; front and back are platinum colored.
Long edges: Square.
Recycled content: More than 90 percent by weight.
Emissions: Asbestos free.
Weather Defense Platinum can contribute to the U.S. Green Building Council's LEED Credit Qualification in several credit categories to assist in obtaining LEED certification. Visit www.Continentalnorthamerica.com for more details on specific credit contributions and documentation.
Standards and Codes: Weather Defense Platinum is formulated to perform in accordance with ASTM C 1177.
Weather Defense Platinum is UL classified for surface burning (File No. R16102) (tested in accordance with ASTM E 84); flame spread = 10; smoke developed = 0.
Core combustibility (tested in conformance with ASTM E 136): noncombustible.
Install according to Gypsum Association standard GA-253 or GA-254 or ASTM C 1280. Install with the "Continental Weather Defense" logo toward the exterior. Joint treatment is not required to maintain weatherability. The limited warranty is provided upon request.
Wear safety glasses and NIOSH-approved respirators during cutting, breaking, rasping, or other dust-producing activities.
- Mold Resistance
- Weather Resistance
- Warranted Performance
Weather Defense Platinum is designed for exterior wall and soffit applications where resistance to normal weather conditions is desired.
Other Weather Defense® Products
- Weather Defense® Platinum Sheathing Type X
- Weather Defense® Platinum Sheathing
- Weather Defense® Platinum Shaftliner Type X
- Weather Defense® Platinum Interior
- Weather Defense® Platinum Interior Type X
Continental Case Study
Being Bison Strong
Weather Defense Platinum Interior
Helping New Florida Home Achieve LEED Platinum
In pursuit of becoming certified LEED® Platinum and net-zero, this green home in Miami Beach, Florida is using Continental Weather Defense® Platinum Interior drywall throughout its construction. Even though using Continental drywall may not take this home off the grid, by being produced with synthetic gypsum within 500 miles of the project site,…
To complement its full range of BISON BOARD products, Continental has developed a top quality line of finishing products designed to meet the varied needs of building professionals.